KTM 1090 Adventure Forum banner

Centerstand Compatability

2438 Views 3 Replies 4 Participants Last post by  BlueVan
New owner of an '18 1090R and am looking for a centerstand.
Not sure if the 1190/1290 centerstands work. Wanted to bounce
this off the forum before I got too far down the rabbit hole.

This is just the first question of many.....;)

TMule
1 - 4 of 4 Posts
New owner of an '18 1090R and am looking for a centerstand.
Not sure if the 1190/1290 centerstands work. Wanted to bounce
this off the forum before I got too far down the rabbit hole.

This is just the first question of many.....;)

TMule
Went down this path after a flat on the rear and having a mate struggling to balance the bike on the side stand. Was waiting on a backorder stand from Adventure moto Outback Motortek Centre Stand For KTM 1090/1190/1290 [Colour:Black] | Adventure Moto Australia but got impatient and went for an OEM one from https://www.ktmonlineparts.com.au/part/ktm/60803916044#content. Reall straight fwd fit until you come to attach the springs. Those little buggers are tricky. I ended up using a much longer bolt, then once I had the springs stretched sufficiently I used a couple of cable ties to secure the bracket while I removed the long bolt and fitted the short bolt that came with the kit.
Note that the R and S models have different length centre stand legs. Even so, with an ''aggressive" tyre (e.g MOTOZ Tractionator) I found the wheel to not have enough clearance to remove easily, especially on dirt where the stand's feet sink in. I now carry two small wooden blocks in my toolkit as I know there will not be a flat piece of rock in sight when I need it.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top