KTM 1090 Adventure Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
Hi, anyone know what is the factory setting of the suspension it is set at? I would like to hear experiences in the setting of the suspension.

Thanks

Michel
 

·
Registered
Joined
·
29 Posts
That is only for the rear schock, as the front is not adjustable,
The owner manual said you get 2 turn on preload, and 12 on the low screw for the bumping speed,
I have tried to turn the preload counterclockwise, as I found the rear too rough, with an Allen key, very hard , I was afraid to beak something....I.ll ask the dealer..
 

·
Registered
Joined
·
2 Posts
Hi Michel

The suspension on the 1090R is fully adjustable front and rear using preload, compression and rebound settings on the fork and shock. I do mostly offroad riding and find that I need the bike set on Sport settings. I am not sure what the factory sets the bike to but I would always double check as I have had some odd experiences in the past. The bike manual makes it very easy to setup the basics for your type of riding.

Has anyone else found a chattering sound coming from the forks? (It's not the brake disks.)

I am still find the front end a bit soft but am currently investigating and also working on changing my riding position slightly. (I ride right over the bars....)

I hope this helps.

Cheers
Cris
 

·
Registered
Joined
·
27 Posts
Cris Ingram, I just found this post & yes I am also getting chatter from the front forks. I have been backing of the compression setting (was on 14 clicks but tried 17 - full soft) which seemed to change it, but the front end felt noticeably softer, maybe too soft. It hasn't always done this, but at almost 9000kms it may be worth a fork oil change at the 10,000km service.
 
1 - 5 of 5 Posts
Top