KTM 1090 Adventure Forum banner

Help! Looking for the peg/spacer btw the front brake lever and the front brake switch

7.1K views 7 replies 5 participants last post by  pinkgarage2  
#1 · (Edited)
I lost mine as it fell out when I was swapping out my front brake lever.

Its a tiny, tiny rubbery spacer thing that has no separate part # in the OEM parts diagram. It fits in the hole as indicated (picture to be uploaded momentarily).

Any help or leads on what to order or where to find a spare/salvage bike to grab from would be awesome!! Local dealer said I need to order the whole assembly. I'm not doing that quite yet.
 

Attachments

#4 ·
I tried a few, no love. I wish people stocked some of these parts so you can look at what actually comes with the part.

For instance, there was another screw I needed and it was absent from all of the parts diagrams. Lo and behold, there was an adjacent part # that included the mysterious screw, but you wouldn't have know that unless you had that part # in front of you.
 
#3 ·
I did the same exact thing and lost that piece when replacing my factory levers with some shorter ones. I easily made a replacement part from an aluminum pop rivet; just cut off the stem and file the head down flat until you achieve the optimum thickness so your brake light will work properly and won't be on all the time.
 
#6 ·
****! Thanks a lot.

I ended up doing a ton of searching, ended up finding a Brembo part number that Ducati bikes use for a similar, if not the same, switch. Ordered up the brake switch for $18 on ebay and it came with the part I needed (actuator rod). What a PITA.

Thanks again!
Matt